Chengdu General Rectification Electric Appliance Research Institute
Main products:Rectifier
Products
Contact Us
  • Contact Person : Mr. Qiao Stephen
  • Company Name : Chengdu General Rectification Electric Appliance Research Institute
  • Tel : 86-28-85737315
  • Fax : 86-28-85737317
  • Address : Sichuan,Chengdu,Unit 11# ,Yuanjiang Rd.,Jiaolong Industrial Port, Shuangliu
  • Country/Region : China
  • Zip : 610200

KGDF(S)-Series Silicon Controlled Electroplating Rectifier

KGDF(S)-Series Silicon Controlled Electroplating Rectifier
Product Detailed
1.High stability,small volule,light weight 2.High efficiency and energy-saving 2.Highly integrated,easy operation,good service

Main Technical Features and Performance Index

1. Operation mode: local/remote operation mode can be chosen

2. Output control mode: constant current/constant voltage output control; output control mode can be chosen

3. Soft start time: Working time of soft start can be set between 0-200s

4. Constant current/constant voltage control accuracy: control accuracy≤±0.5%

5. Rectification mode: silicon controlled phase-shifting voltage regulation and rectification

6. Rectification pulse number: SCR 6 pulse rectification, 12 pulse SCR phase-shifting voltage regulations and rectification

7. Output current ripple coefficient: 6 pulse rectifier ≤5%, 12 pulse rectifier≤1-3%

8. Silicon controlled trigger controller: DSP computer digital trigger control, trigger pulse asymmetry≤0.1°, pulse phase-shifting resolution≤1μs (0.018 degree)

9. Main protection functions: lack phase, overvoltage, under voltage, quick fuse or fuse alarm protection of AC power supply, output over current and current limiting protection, output short circuit and instantaneous overload protection, over temperature and overheat protection of silicon controlled components, rectification transformer and bus copper bar, overheating and high pressure protection of wind machine, low block trigger pulse protection

10. RS485 remote communication interface can be chosen according to customer’s requirement, remote monitor can be realized by Internet CAN bus and PRUBSS bus communication protocol

11. Rectification transformer adopts three-core five-column structure, iron core uses good quality oriented silicon steel sheet, tranformer coil are all copper, no-load loss less than 2%, 8-10% power-saving comparing with common three-phase three column rectification transformer

12. Local/remote control operation: remote operation control cabinet can be choose according to customer's situation on site, hose and remote control cabinet are placed seperately, on-site operation is more convenient, anti-corrosion protection of host inccreased greatly

13. Cooling mode: air cooling or water cooling can be chosen according to customer's requirement

KGDF(S)-Series Silicon Controlled Electroplating Rectifier



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.